In Windows 7, you had to manually install the Mbed serial driver to enable the serial port. The legacy mBed driver is still available, but as Windows 7 reaches end of life you should upgrade your operating system accordingly. Windows 8.1/10 (WebUSB not working) If the Mbed Serial driver has been manually installed it might interfere with the. Intel Android device USB driver 1.10.0 on 32-bit and 64-bit PCs This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system on a laptop or desktop PC from drivers without restrictions. Intel Android device USB driver 1.10.0 is available to all software users as a free download for Windows. I followed the KB Drivers for EZ-USB® FX1™, FX2LP™, and FX3™ - KBA94413 to download Drivers.zip. When I update driver through browse my unzip driver, Windows prompted 'Couldnot find the driver for your device' My device is a simple logic analysis 24MHz with CY7C68013A chip. Choose to select the location of the new driver manually and browse to the folder where you downloaded the driver. About USB Driver: When tablets, e-readers or similar devices are connected, Windows platforms usually apply a generic driver that allows the system to recognize the device, exchange files, and make use of basic functions. Download Realtek USB Audio Driver 6.3.9600.40 for Windows 10 64-bit (Sound Card). Point before installing a device driver. This will help if you installed an.

USB serial device with Maple Mini board.

Dependencies: USBDevice_STM32F103 mbed-MapleMini mbed

Building a USB serial device with Maple Mini board

A USB device stack has been developed by mbed in order to provide all the great capabilities of USB. The USBdevice class has been extended by Norimasa Okamoto to support also the NUCLEO-F103RB boards (and others). For more information concerning the stack architecture, visit the USBDevice stack architecture.
The USBSerial class uses the USB interface to emulate a serial port. The Maple Mini board is recognized by the computer as a serial port. This is a great solution to communicate easily between the microcontroller and a computer.The mbed serial port works by default on Mac, Linux and Windows 10, but earlier version of Windows needs a driver. These instructions explain how to setup the mbed Microcontroller to use the USB serial port on Windows 7 and earlier.

NOTE:

If you build a USB serial device with the Maple Mini board then note that for the USB device to work the USB DP pin (PA_12) shall be connected to VCC over a 1.5k resistor (R10). Otherwise the host PC won't recognise the USB device and the USB device library code will hang. All parts are already installed on the board (see in the schematic below) and can be connected/disconnected using a DigitalOut on pin PB_9.

In this application, power the Maple Mini board over a USB cable connected to the Mini-B USB connector that you are going to use for the USB serial communication with the connected PC. Once the binary has been downloaded to the board, disconnect and then reconnect the USB cable to the Maple Mini board to start running the program and to get the USB serial connection work.

Revisions of USBDevice_STM32F103.lib

Mbed USB Devices Driver Download For Windows 101