• If your USB device does not work the most likely problem is missing or outdated drivers. When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device.
• In Device Manager, right click on the PN entry under “Other Devices” and choose Update Driver. In the Update Driver window, choose Browse my computer for driver software. In the next window, click the Browse button and navigate to the location of the extracted folder above and click Next. NOTE: YOU WILL HAVE TO REPEAT STEPS 4 to 6 TWICE.
• On the Device Manager screen, expand the entry for Universal Serial Bus Controllers. In the expanded Universal Serial Bus Controllers, right-click on the faulty device and then click on the Properties option. On the next screen, click on the Driver tab and then click on the Uninstall button.

(See Pocket‐Neurobics home page for details.) For units which fail whilst out of warranty, and not having suffered physical damage, a service fee of US$120 for repair or replacement shall be applicable. TrekStor DS pocket light USB Device - Driver Download. Vendor:. Product: TrekStor DS pocket light USB Device. Hardware Class: DiskDrive.

Installing the ASPEN USB drivers

The ASPEN USB drivers are installed from the ASPEN Installation Disk which comes with each device, by running the ASPEN Device Installer. Normally this is done before connecting an ASPEN device to the PC for the first time, but it can be done afterwards if necessary. The driver installation only needs to be done once.

If an ASPEN device is connected to a PC without prior installation of the drivers from the ASPEN Installation Disk, manual installation is possible in the case of Windows XP and Vista operating systems, using the New Hardware Found wizard. In the case of Windows 7, there is no New Hardware Found wizard, so manual installation is a bit more involved. In any of these cases it's not really necessary - just cancel the New Hardware Found wizard (if open) and run the ASPEN Device Installer from the Installation Disk.

Installation with ASPEN Device Installer

Step 1

Place the ASPEN Installation Disk into the CD-ROM drive. If 'AutoRun' is enabled on that drive then the ASPEN Installation Disk utility will open.

Note: If AutoRun is not enabled then use Start->Run to run 'autorun.exe' on the drive holding the ASPEN Installation Disk. For instance, if the CD-ROM drive is drive E: then run 'E:autorun.exe' to open the ASPEN Installation Disk utility.

Click Install ASPEN Software/USB Drivers to proceed.

Two versions of the USB driver installer are provided, for different types of Windows PC:

• 32-bit Windows, click Install USB Drivers (32-bit)
• 64-bit Windows, click Install USB Drivers (64-bit)

Step 2

Drivers Pocket Neurobics Usb Devices Adapter

The ASPEN Device Installer opens.

Click Next to proceed.

Step 3

The EULA is presented.

Accept, then click Next to proceed.

Step 4

The drivers are installed from the CD.

When installation is complete, the Driver Name and Status are displayed. Click Finish to close the Device Installer. You may now connect any ASPEN device to the PC and drivers will be loaded automatically.

Drivers Pocket Neurobics Usb Devices Wireless

Manual Installation

Drivers Pocket Neurobics USB Devices

When an ASPEN device is connected to a PC for the very first time, Windows will detect it. In the case of Windows XP and Vista, the Windows Found New Hardware Wizard automatically opens if the ASPEN USB drivers have not been pre-installed by the ASPEN Device Installer. To proceed, the ASPEN Installation Disk will be needed. Follow the appropriate link below:

Manual USB driver installation on the Windows 7 operating system is a little different... Follow the link below: